PROCESS INSTRUMENTS
| Model 510-CT | Specification |
|---|---|
| Range ( Auto Ranging) | Conductivity :- 0-20.00μS/cm, 200.0μS/cm, 2000μS/cm TDS :- 0-10.00ppm, 100.0ppm, 2000ppm ( With 0.49 Factor) |
| Resolution | 0.01, 0.1, 1 for both Conductivity & TDS |
| Accuracy | +/- 1% Of F.S |
| Display | 4 Digit Single Red LED Display |
| Calibration | Single point manual Calibration |
| Calibration Slop | +/- 30% Of Display Reading |
| Cell ( Sensor ) | 1.0 Cell constant +/- 10% with 1/2” BSP threading & with 4mts Cable |
| TDS Factor | Factory Def. 0.49 |
| Relay O/P (Optional) | One 2 Amp Relay O/P With Hystreasis & Decimal Setting |
| Power Requirement | 230V A.C +/-10%, 50Hz single phase |
| Environment | 5 to 50c. |
| Dimension & Weight | 96 x 96 x 65mm ( Grey ABS Cabinet ), 400grams for Inst. Only (Approx) |
Note: Digital Instruments Corp reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.
Copyright © DIGITAL INSTRUMENTS CORPORATION 2017
